- Created: 12-02-22
- Last Login: 12-02-22
User Profile
ty669ww
junguansteel.com
The steel of Steel Plate comes in many grades, specifications, shapes, and finishes - the World Steel Association lists over 3,500 different grades of steel, each with unique properties. The various types mean that steel can by widely used in infrastructure, appliances, vehicles, wind turbines, and many more applications.
Optimizing steel's properties for each application goes beyond changing the chemical composition, however. The manufacturing processing of steel can also have a significant impact on steel products - even when the grades and specifications are the same. One key distinction among pre-fabricated steel products is the difference between hot rolled and cold rolled steel.
It's important to note that the main difference between hot rolled and cold rolled steel is one of process. "Hot rolling" refers to processing done with heat. "Cold rolling" refers to processes done at or near room temperature. Although these techniques affect overall performance and application, they should not be confused with formal specifications and grades of steel, which relate to metallurgical composition and performance ratings. Steels of different grades and specifications can be either hot rolled or cold rolled - including both basic carbon steels and other alloy steels.
It may seem obvious, but some types of steel are better suited for certain applications. Knowing which to use can help avoid over-spending on raw materials. It can also save time and money on additional processing. Understanding the differences between hot and cold steel is integral to choosing one over the other.
Hot rolled steel including Hot Rolled Steel Plate and Hot Rolled Steel Coil is steel that has been roll-pressed at very high temperatures - over 1,700?F, which is above the re-crystallization temperature for most steels. This makes the steel easier to form, and resulting in products that are easier to work with.
To process hot rolled steel, manufacturers first start with a large, rectangular length of metal, called a billet. The billet is heated and then sent for pre-processing, where it is flattened into a large roll. From there, it is kept at a high temperature and run through a series of rollers to achieve its finished dimensions. The white-hot strands of steel are pushed through the rollers at high speeds. For sheet metal, rolled steel is spun into coils and left to cool. For other forms, such as bars or plates, materials are sectioned and packaged.
Steel shrinks slightly as it cools. Since hot rolled steel is cooled after processing, there is less control over its final shape, making it less suitable for precision applications. Hot rolled steel is often used in applications where minutely specific dimensions aren't crucial. Railroad tracks and construction projects often use hot rolled steel.
Hot rolled steel can often be identified by the following characteristics:
A scaled surface - a remnant of cooling from extreme temperatures
Slightly rounded edges and corners for bar and plate products (due to shrinkage and less precise finishing)
Slight distortions, where cooling may result in slightly trapezoidal forms, as opposed to perfectly squared angles
Cold rolled steel including Cold Rolling Steel Sheets is essentially hot rolled steel that has been through further processing. Once hot rolled steel has cooled, it is then re-rolled at room temperature to achieve more exact dimensions and better surface qualities.
Cold "rolled" steel is often used to describe a range of finishing processes, though technically "cold rolled" applies only to sheets that undergo compression between rollers. Steel forms that are pulled, such as bars or tubes, are "drawn", not rolled. Other cold finishing processes include turning, grinding, and polishing - each of which is used to modify existing hot rolled stock into more refined products.
Cold rolled steel can often be identified by the following characteristics:
Better, more finished surfaces with closer tolerances
Smooth surfaces that are often oily to the touch
Bars are true and square, and often have well-defined edges and corners
Tubes have better concentric uniformity and straightness
There are other kinds of steel made with different technology like Hot Dip Galvanized Steel including Hot Dip Galvanized Steel Sheet and Hot Dip Galvanized Steel Coil, and other Steel Application like Railway Steel.
The steel of Steel Plate comes in many grades, specifications, shapes, and finishes - the World Steel Association lists over 3,500 different grades of steel, each with unique properties. The various types mean that steel can by widely used in infrastructure, appliances, vehicles, wind turbines, and many more applications.
Optimizing steel's properties for each application goes beyond changing the chemical composition, however. The manufacturing processing of steel can also have a significant impact on steel products - even when the grades and specifications are the same. One key distinction among pre-fabricated steel products is the difference between hot rolled and cold rolled steel.
It's important to note that the main difference between hot rolled and cold rolled steel is one of process. "Hot rolling" refers to processing done with heat. "Cold rolling" refers to processes done at or near room temperature. Although these techniques affect overall performance and application, they should not be confused with formal specifications and grades of steel, which relate to metallurgical composition and performance ratings. Steels of different grades and specifications can be either hot rolled or cold rolled - including both basic carbon steels and other alloy steels.
It may seem obvious, but some types of steel are better suited for certain applications. Knowing which to use can help avoid over-spending on raw materials. It can also save time and money on additional processing. Understanding the differences between hot and cold steel is integral to choosing one over the other.
Hot rolled steel including Hot Rolled Steel Plate and Hot Rolled Steel Coil is steel that has been roll-pressed at very high temperatures - over 1,700?F, which is above the re-crystallization temperature for most steels. This makes the steel easier to form, and resulting in products that are easier to work with.
To process hot rolled steel, manufacturers first start with a large, rectangular length of metal, called a billet. The billet is heated and then sent for pre-processing, where it is flattened into a large roll. From there, it is kept at a high temperature and run through a series of rollers to achieve its finished dimensions. The white-hot strands of steel are pushed through the rollers at high speeds. For sheet metal, rolled steel is spun into coils and left to cool. For other forms, such as bars or plates, materials are sectioned and packaged.
Steel shrinks slightly as it cools. Since hot rolled steel is cooled after processing, there is less control over its final shape, making it less suitable for precision applications. Hot rolled steel is often used in applications where minutely specific dimensions aren't crucial. Railroad tracks and construction projects often use hot rolled steel.
Hot rolled steel can often be identified by the following characteristics:
A scaled surface - a remnant of cooling from extreme temperatures
Slightly rounded edges and corners for bar and plate products (due to shrinkage and less precise finishing)
Slight distortions, where cooling may result in slightly trapezoidal forms, as opposed to perfectly squared angles
Cold rolled steel including Cold Rolling Steel Sheets is essentially hot rolled steel that has been through further processing. Once hot rolled steel has cooled, it is then re-rolled at room temperature to achieve more exact dimensions and better surface qualities.
Cold "rolled" steel is often used to describe a range of finishing processes, though technically "cold rolled" applies only to sheets that undergo compression between rollers. Steel forms that are pulled, such as bars or tubes, are "drawn", not rolled. Other cold finishing processes include turning, grinding, and polishing - each of which is used to modify existing hot rolled stock into more refined products.
Cold rolled steel can often be identified by the following characteristics:
Better, more finished surfaces with closer tolerances
Smooth surfaces that are often oily to the touch
Bars are true and square, and often have well-defined edges and corners
Tubes have better concentric uniformity and straightness
There are other kinds of steel made with different technology like Hot Dip Galvanized Steel including Hot Dip Galvanized Steel Sheet and Hot Dip Galvanized Steel Coil, and other Steel Application like Railway Steel.